YSVTP-500/YSVTP-600
SVTP Speed drilling and Tapping machine
1. High rigidity structure design
2. High-speed Direct-spindle
3. High-speed tool change mechanism
4. The four-axis machining
5. Pre-Pull Ball screw
6. The three axes of the rail line
  Description
High rigidity structure design
● mining machine box design
● provide sufficient stability for high-speed drilling, tapping and milling engraving
● structural overall planning and design, minimum footprint
● waterproof designed, easy to discharge drainage facilities
 
High-speed Direct-spindle
● Direct-spindle drive system
● spindle speed 12000 rpm, suitable for general processing: milling, drilling, tapping
● Spindle speed 20000 rpm, suitable for special processing: aluminum parts processing, micro-engraving
● Spindle adopt circulating cooling system to protect the bearing life
● Special structural design, spindle thermal expansion does not extend down to guarantee precision and stability
 
High-speed tool change mechanism
● Cam umbrella magazine (turret) / Split mechanical quick tool change
● spare magazine 16T (standard) or 21T (optional)
● Tool change time of 1.8 seconds (tool to tool)
● can be installed servo magazine
● folder knife arm aluminum die-cast mining, to increase the rigidity easily damaged
 
 
Ball screw
● adopt pretension design
● repeat positioning accuracy, increase stability and processing
● Pre-pull design, to reduce the coefficient of thermal expansion
 
Three axial line rail
 ● rapid feed up to 48m / min
● according to customer demand processing, can be equipped with a ball screw or roller screw
● oil pressure lubrication to ensure that the rail line life
 
Four-axis machining
● increase in fourth axis function, simultaneous multi-sided machining
● suitable for mobile phones, aerospace, electronics parts processing
  Product Specifications
Specifications 規格 YSVTP-500 YSVTP-500 H YSVTP-600 YSVTP-600 H
工 坐 臺    
Work Table
尺寸 (長X寬) Working table size 650X400 mm 650X400 mm 800X400 mm 800X400 mm
T型槽  T slots 14x3x125 mm 14x3x125 mm 14x3x125 mm 14x3x125 mm
最大負荷  Max. table load 200 kg 200 kg 200 kg 200 kg
行 程
Travel
軸行程  X axis travel 500 mm 500 mm 600 mm 600 mm
軸行程  Y axis travel 400 mm 400 mm 400 mm 400 mm
軸行程  Z axis travel 300 mm 300 mm 300 mm 300 mm
主軸鼻端至工作臺面的距離  Spindle nose to table surface 130-430 mm (可加高) 130-430 mm (可加高) 130-430 mm (可加高) 130-430 mm (可加高)
主軸中心至立柱軌道面距離  Spindle center to column 410 mm 410 mm 410 mm 410 mm
主軸系統
Spindle
傳動方式  Transmission 直結式 直結式 直結式 直結式
主軸轉速  Spindle speed 20000 RPM 12000 RPM 20000 RPM 12000 RPM
主軸馬達  Spindle motor 5.5 kw 7.5 kw 5.5 kw 7.5 kw
X-Y-Z 軸馬達 (三菱) X-Y-Z motor output (MITSUBISHI ) 1.5/1.5/2.2 kw 1.5/1.5/2.2 kw 1.5/1.5/2.2 kw 1.5/1.5/2.2 kw
進給系統
Feed
快送速度 (X/Y/Z)  Rapid Feed 48/48/48 m/min 48/48/48 m/min 48/48/48 m/min 48/48/48 m/min
最大進給速度  Cutting feed rate 10 m/min 10 m/min 10 m/min 10 m/min
控制系統 Controller 控制器廠牌/型號  Controller brand/Model MITSUBISHI M70 MITSUBISHI M70 MITSUBISHI M70 MITSUBISHI M70
自動換刀系統
ATC System
刀庫形式  ATC type 凸輪轉塔式機械快
速換刀 Turrent type mechanism
凸輪轉塔式機械快
速換刀 Turrent type mechanism
凸輪轉塔式機械快
速換刀 Turrent type mechanism
凸輪轉塔式機械快速換刀 Turrent type mechanism
刀柄  Spindle taper BT-30 BT-30 BT-30 BT-30
刀庫容量  Tool no. 16 pcs 16 pcs 16 pcs 16 pcs
最大刀具長度  Max. tool length 200 mm 200 mm 200 mm 200 mm
最大刀具重量  Max. tool weight 3 kgs 3 kgs 3 kgs 3 kgs
換刀時間  Tool to tool time 1.2 sec 1.2 sec 1.2 sec 1.2 sec
空壓源Air Pressure 空壓源  Air Pressure requirement 6 kg/cm2 6 kg/cm2 6 kg/cm2 6 kg/cm2
機械規格
Machine & Diameter
佔地面積 (LXW)  
Floor Occupation
2230X1650 mm 2230X1650 mm 2230X1850 mm 2230X1850 mm
機械重量  Machine weight 2300 kgs 2300 kgs 2500 kgs
2500 kgs